huge savings on

corrugated roofing

Save on corrugated roofing work today.
Compare fully-approved, rated Rylands roofers today!

  • Exclusive December deals
  • Rated, trusted Rylands roofers
  • 60sec online quote application
  • Compare prices with no-obligation

Don't just take our word for it
4.5/5

(58 quotes - 18/12/24)

Corrugated Roofing in Rylands - Sheet Install & Repair Costs

Rylands corrugated roof costs for supply, install and repairs

One of the best choices when it comes to covering many structures is corrugated roofing Rylands. Material is corrugated when it contains alternating folds and ridges that run in parallel lines with each other. When used in roofing, these folds and ridges serve an important function when it comes to the removal of debris while also helping to deflect falling precipitation.

Providing corrugated roof deals to Rylands residents since 2010!

corrugated roofing Rylands, Nottinghamshire
what is corrugated roofing made of?

What is Rylands Corrugated Roofing Made of?

This type of roof is normally made from a metal such as aluminium or steel, but it can sometimes be made from fibreglass or plastic as well. Several different grades of each type of material are available and the one chosen largely depends on the structure where the roof is being placed. Numerous colour choices are also available, and the depth of the grooves also varies in order to provide a unique look for a particular building.

Why Materials are Corrugated

The term “corrugated” simply means that a material has been shaped into grooves or ridges to add strength. In most cases, corrugated roofing is made of a very lightweight and inexpensive material; the ridges and grooves make it stronger than it would be otherwise. You may have heard the term before when referring to corrugated cardboard. Cardboard that has been corrugated is stronger than cardboard made of pressed paper.

Typical Uses of Corrugated Roofing

Although a corrugated roof isn’t without its benefits, it’s much better off when used in certain applications. Because it doesn’t drown out noise well and it’s more susceptible to the elements, it’s often used on sheds, detached garages, barns, and other buildings that don’t include actual living space. Most homeowners shy away from using it on their actual homes, even though it’s inexpensive, for these very reasons. However, those on a budget who are interested in a rustic or industrial style can still benefit.

typical Rylands corrugated roof uses

What are the Advantages of Corrugated Roofing?

When it comes to corrugated roofing, Rylands consumers will notice different benefits from various types of materials. Even so, there are some general benefits to installing this style of roof that everyone can enjoy including:

  • Most corrugated panels are relatively inexpensive
  • Usually lightweight and easy to carry
  • Take very little time to install
  • Helps deflect rain, sleet, and snow
  • Somewhat safer to walk on since the ridges provide a slight degree of traction
  • Available in a wide range of colour choices
  • Those made from metal can provide some protection in the event of a fire
  • Can give a home a unique look, making it stand out from those around it
  • Very little maintenance is required to keep this roofing looking good
  • It’s an eco-friendly roofing solution because it uses less energy for production than many other types of roofing
  • Zinc from old roof sheets and other sources can be recycled into brand new sheets, reducing the need for virgin materials
  • Zinc roof sheets can last up to 50 years if they are a good quality, while plastic corrugated sheeting can last for between 10 and 15 years in most cases

An Affordable Roofing Option

Corrugated roof sheeting is available in fibreglass, plastic and various types of metal, and this type of roof covering is known for being one of the more affordable options for Rylands homeowners to use. When installed correctly, corrugated roof sheets have the ability to last for a few decades, provided that they are cleaned and inspected regularly.

disadvantages of Rylands corrugated roofing

Average Corrugated Roofing Costs

Corrugated roofing is usually one of the most affordable options where roof coverings are concerned. Below are a few examples of approximate pricing for the various items needed to install a corrugated roof, along with labour charges:

  • Plasterboard ceiling – between £40 and £50 per m²
  • Timber joists, wall plates and other required timber – between £40 and £48 per m²
  • Plywood (if needed) – between £25 and £35 per m²
  • Slab insulation – between £25 and £30 per m²
  • Breathable membrane – approximately £4 to £7 per m²
  • Vapour barrier - between £3 and £6 per m²
  • Timber slats for supporting the corrugated roofing pieces – between £20 and £25 per m²
  • Zinc or other corrugated roofing pieces – between £130 and £165 per m²

In some cases, guttering may need to be replaced when installing or replacing corrugated roofing, and a few examples of approximate pricing for this can be found below:

  • Steel guttering – approximately £25 to £35 per metre
  • Steel downpipes – between £45 and £55 per metre
  • Zinc box guttering – between £80 and £95 per metre
  • Flashings – approximately £20 to £40 per metre, depending on how wide they need to be
disadvantages of Rylands corrugated roofing

Disadvantages of Rylands Corrugated Roofing

Homeowners should also be aware of some potential disadvantages which might include:

  • Do not insulate well against noise
  • More susceptible to wind damage than other types of roofs
  • Requires an experienced contractor in order to install
  • More maintenance is required than with smooth-panelled roofs
  • Coloured roofs may fade over time

Factors That Influence the Cost of Installation

Rylands corrugated roofing can have a wide range of prices when it comes to the installation of this material. A few factors that can result in one estimate being higher than another include:

  1. Type of material chosen – the price of fibreglass tends to be more stable but the price of metal can fluctuate considerably
  2. Whether additional insulation will be placed underneath in order to provide protection from noise
  3. The addition of special sealants (may not be needed with fibreglass roofs)
  4. Whether old shingles or roofing tiles also need to be removed and disposed of
  5. Amount of cutting needed – installing full sheets can be more cost-effective than installing smaller panels
  6. Whether flashing around chimneys also needs repaired or replaced
  7. The need to provide special anchoring for purlins, which are the supports for a building’s rafters
  8. Amount of overhang if any
  9. Type of hardware used to fasten the roof to its deck. Nuts and screws may sometimes be needed rather than nails, and this can increase the cost of roof installation.
  10. Roof size – Larger buildings will obviously require more corrugated sheets than smaller roofs
  11. Potential fluctuations in zinc prices – zinc prices tend to fluctuate from time to time, so homeowners may have to act quickly after receiving a quote if they want piecing to remain the same
  12. Quality of roof sheeting being used – higher quality roof sheets can cost as much as £200 to £250 per m², especially if they’re zinc
  13. Whether roofing is flat or pitched – Flat roofing is cheaper to install than pitched roofing because it is less labour intensive
  14. Overall design of the project – contractors and architects often have different ways of designing a zinc roof, so more complex options would be costlier than simpler layouts
Rylands corrugated roofing costs

Costs Associated with Corrugated Roofing

In most cases, corrugated roofing is one of the most affordable options available, especially in cases where large properties require roof replacement. This type of roofing can often be installed for around £3 to £4 per square foot, and then end cost will normally be determined by the types of corrugated material being used. Although corrugated steel, metal or aluminium roofing sheets are normally the most affordable option, other popular types of corrugated material can include fibreglass and various forms of hail- and impact-resistant plastic – most of which are available in a wide range of colour options these days as well.

When receiving estimates, it’s important for homeowners to ask lots of questions about the installation process. That way, they can be sure they are getting quality workmanship even if it means paying a little bit more for this job in the long run.

DIY Installation Not Recommended

Zinc and other types of corrugated roof sheets can be tricky to work with because of their size and the fact that the edging on them is usually quite sharp. More than one person is required to get the sheeting up on to the roof and install it as well, meaning that this is not a project that should be attempted in a DIY capacity.

Qualified roofers will also know how to install each sheet in such a way that leaks don’t occur between them, and they will also be able to provide you with recommendations regarding how often your roof should be inspected after installation has been completed.

Speedy results. We were able to appoint a contractor within 24 hours of our enquiry. Mr O. Rylands, Nottinghamshire

Your roofing questions answered

The most commonly used materials for corrugated roofing are fibre cement, fibreglass, and metal. Most use of asbestos cement has been removed over the last few decades, though you will find some older buildings that still have asbestos concrete.

This will depend primarily on your application. Fibre reinforced cement can be ideal for climate controlled buildings, because concrete insulates better than metal or fibreglass. Metal is good for roofing that needs to be done quickly or on a budget.

This will vary depending on the thickness of the corrugated material and the type of coating that has been applied. In general though, building a new corrugated roof will take a week or less.

When properly installed and cared for, they can last up to 3 times as long as a standard roof with asphalt shingles. The average lifespan for this type of roof is anywhere between 25-60 years.

Corrugated panels and sheets are designed in such a way that water will naturally be expelled from it. Its ribbed pattern also adds a great deal of visual interest, making it more attractive than flat metal panels.

Yes. In many cases, corrugated roofing near me has been known to last for between 30 and 40 years, especially if it has been manufactured from galvanised zinc or steel. However, fibreglass and other forms of plastic corrugated roof sheets have been known to last between 15 and 20 years as well.

While a corrugated roof is exceptional at deflecting snow, ice, and water, it’s highly susceptible to wind damage. That’s because wind can lift the sheets right at the edge of the roof and tear them off with a large gust. It’s important to check the nails in your corrugated roofing – especially along the edges – to prevent this. Metal corrugated roofing is also susceptible to hail storms, since hail can easily dent these materials.

This depends on the manufacturer and the materials used. For example, some corrugated roofing is made of metal, which can be recycled from aluminium cans and other products. Conversely, some corrugated roofing is made of plastic, which may or may not contain post-consumer recycled content. You should ask your contractor about eco-friendly options and whether your corrugated roofing can be recycled at the end of its lifetime.

Although many homeowners tend to avoid corrugated roofing for their homes, those who do choose it prefer fibreglass for its inherent benefits. For example, fibreglass can provide better insulation than other types of material, including metal and plastic. Fibreglass also comes in a variety of colours, allowing you to customize your application to your own personal preferences.

Corrugated roofing is most popular for garages, sheds, and other outbuildings that are considered non-livable spaces. Despite all its advantages, corrugated roofing isn’t as durable as its counterparts, and the ridges and grooves can amplify noise rather than drown it out. However, in non-living spaces like garages, corrugated roofing protects the structure by deflecting water, snow, and ice. It’s incredibly inexpensive and easy to install, which makes it one of the most popular materials used for roofing in the UK.

The final cost will depend on the type of sheets you would like to use as well as the size of the roof in question. Our network of Nottinghamshire roofing specialists will be able to provide you with an estimate beforehand though

Corrugated roof sheets can be quite awkward to work with because of their size and the fact that they can have extremely sharp edges. As a result, it is not recommended that you perform a corrugated roof installation as a DIY project.

The Quote Process

Corrugated roofing Rylands has a unique style and appearance that has stood the test of time. It can greatly enhance any structure ranging from a country farmhouse to an elegant townhouse. With so many choices available when it comes to materials and colour, it is an obvious choice for consumers who want something a little out of the ordinary without breaking their budget to do so.

1 Apply Online In 60 Seconds

Tell us a little about your roofing requirements via our simple online form. We don't need many details to start organising your quotes.

2 Receive Four Free Quote

You'll receive cheap obligation-free quotes direct from up to four Rylands roofers keen to help you save.

For no-obligation roofing quotes, look no further. We have the biggest network of vetted roofers in the UK and we'll find you quotes to suit your needs. No-obligation, no-risk quotations

Sample Quote Requests

If it's Rylands corrugated roofing work you need then you're not alone! Below are just a few of the many requests we receive here at Trusted Roofing every single day! Our leading network of expert roofers can cater to all roofing requests.

Date Summary Request
18 Dec Leaking Roof Recently bought a house and the garage roof seems to be dipping in parts and water is leaking down the sides. From the inside it looks like the previous owners have put plywood over the corrugated panels then had asphalt on top.
18 Dec Shed Roof Replacement Need a quote to re-place the corrugated roof on my garden shed. Dimensions approx 25feet by 10 feet.
18 Dec Corrugated Asbestos My garage roof is asbestos corrugated sheet. It is old and needs replacing. I have contacted a firm who can remove the asbestos sheets
18 Dec Replacement To replace a corrugated plastic roof on a lean-to type structure with a more substantial roof I.E Poly-carbonate. Possibly new or refurbished windows and door on this structure also.
18 Dec Hole Repairs There is a hole in one of the corrugated concrete sheets on the garage roof that needs to be replaced/repaired. Please contact me by email with quote
17 Dec Quotes Needed Old flat corrugated roof garage. The garage is detached from the house. Leaking inside but also the corrugated material seems to be saturated with moisture. It is causing mould and damage to items stored inside the garage. I would like to obtained three comparable quotes. Thank you.
17 Dec Standard Costs I'm looking a rough price for corrugated roof to an extension. Standard pitched type roof around 90m2. No details on colour/finish at this stage so if you could quote for a standard type.
17 Dec Single Garage I have a single garage in a block. It has 8 roofing sheets. I have a couple of leaks and would like a quotation for replacing the roofing sheets.
17 Dec Asbestos Flat Roof Hi. I have a 1972 detached garage with a corrugated asbestos flat roof which needs replacing with either corrugated steel or something similar.
17 Dec Prefab Garage I need the roof of my prefabricated garage replaced... the asbestos roof has been replaced by some sheets from Wickes and it's collapsed.
Loose Panels I have a pitched roof on the detached garage made up of corrugated panels. Several are loose and I believe they are asbestos. I need a quote to remove them and Replace them with something safe.
Metal Sheets I need the corrugated roof of my garage replacing with metal galvanised roofing sheets. The roof measures 2900mm x 5650mm.
Cheap Quotes Needed Corrugated iron for a shed in a wood the cheaper the better as not a high quality build. Second hand would be fine, to cover 2960 by 6500.
Storage Shed Roof Replacement roofing needed for our storage sheds. Current roofing is old corrugated sheeting so happy to replace it with the same as long as it is cheap.
Large Scale Roof I am building a second warehouse for my business and would like a corrugated covering of approximately 1,000 metres. Please provide me with a quote for corrugated roofing for this type of project.
Signs of Rust Our home is more than 50 years old, and we have noticed that some of the corrugated sheets on our extension are starting to rust and show signs of wear and tear. Would you be able to send someone out to inspect our roof to determine whether repairs can be done or if we need to perform a full replacement?
Inspection & Repairs I own a small storage house complex, and need to have all of the roofing inspected, as I have had a few complaints about leaks. It is a corrugated roof and some of it may need to be replaced. Please provide a quote for inspection and possible replacement.
Cost Advice Our outbuildings are in need of new roofing. It's currently corrugated and we don't see the need to change it. Could you please advise on the costs involved and how long they will take to replace?
Check for deals in your postcode:

SAVE UP TO 50%

For exclusive December corrugated roofing deals complete this form now!